How Do I Set My 2008r2 Server To Allow Users To Set Background

How To

Summary

Installation Instructions for Microsoft® Windows® Server 2008 R2 with Service Pack 1 for IBM® PureFlex System® x480 Compute Node (Blazon 7903)

Steps

Installation Instructions for Microsoft® Windows® Server 2008 R2 with Service Pack 1 for IBM® Flex System® x480 Compute Node (Type 7903)

Tabular array of Contents:

one.0 What you volition need

2.0 Where to download firmware, device drivers and files

iii.0 Preparing the hardware

4.0 Installing Microsoft Windows Server 2008 R2

• four.ane Updating firmware & device drivers
• 4.2 Enabling Hyper-V
• 4.three Installing V7000 MPIO Device Specific Module
• 4.four Installing IBM System Director Agents
• 4.5 Post installation instructions

5.0 Notices

Installation Instructions for Microsoft® Windows® Server 2008 R2 with Service Pack 1 for IBM® Flex Organisation® x480 Compute Node (Type 7903)

Revision level: 1.00

Notation: Before using this information and the product it supports, read the general data in 5.0 Notices in this document.

Supported servers: IBM® Flex System® x480 Compute Node (Blazon 7903) Follow the instructions in this document in sequential order unless these instructions advise you otherwise. Windows and messages might differ from those in this document. Throughout this document, the term select is used to denote the use of pointer keys, the Tab key, Alt + a letter of the alphabet combination, or the mouse to make a selection.

References to optional hardware in this document practice not imply support of that hardware. For information virtually supported options, see the ServerProven® data for your server at http://world wide web.ibm.com/systems/info/x86servers/serverproven/compat/u.s..

1.0 What you will demand

2.0 Where to download firmware, device drivers and files

three.0 Preparing the hardware

To prepare the hardware, update system firmware, and configure arrays, see the IBM Flex System® x480 Compute Node (Blazon 7903) Installation Guide and User's Guide at the IBM Support Portal .

four.0 Installing Microsoft Windows Server 2008 R2 with Service Pack 1

To brand sure that the latest device drivers and firmware for the IBM® FLEX Arrangement® X480 COMPUTE NODE (TYPE 7903) unit of measurement are installed, follow the instructions in the README (.txt) file that is included with the device driver. To download the device driver and firmware packages and the installation instructions for IBM® FLEX Organisation® X480 COMPUTE NODE (Blazon 7903) , complete the following steps:

1. Go to http://www.ibm.com/support and the IBM Support Portal volition automatically open.
2. Select Browse for a product
3. Under Hardware expand Systems
4. Under Systems expand Flex System and select Flex System x480 Compute Node
5. Click on Select OS and check the box for Windows Server 2008 x86-64 & 2008 R2
6. Click the Submit push button followed past the double arrow push button and verify that the item listed in the correct pane is correct.
7. Click Terminate .
8. In the Flashes and alerts box click on More results to get the complete list of firmware and device drivers for your system. Follow the Readme.txt file in each download package for installation instructions.

4.2 Enabling Hyper-V

To enable Hyper-V nether Windows Server 2008 R2 SP1 complete the post-obit steps:
Note: Delight do not disable the "Socket Interleave" Setting under Memory settings in F1 setup. This is enabled past default to provide the all-time performance and stability for utilise with Windows 2012 R2 Hyper -5.

1. Start Server Director panel
2. In the Roles Summary surface area of Server Managing director main window, click Add Roles .
3. On the Select Server Roles page, select Hyper-Five .
4. Close Server Managing director , and allow system to reboot.
5. Hyper-V configuration details for Windows 2008 R2 tin can be found at the following link: http://technet.microsoft.com/en-u.s.a./library/cc770901.aspx

iv.3 Installing V7000 MPIO Device Specific Module

If connecting the V7000 storage controller with multiple connections the MPIO device specific module needs to be installed. This is just needed if at that place multiple connections to the V7000 storage organization. This can be downloaded from the following location http://www-01.ibm.com/support/docview.wss?uid=ssg1S4000350

4.4 Installing IBM System Director Agents

If integrating the IBM Flex System x480 Compute Node with the Flex Organisation Manager the IBM Organisation Managing director agents need to be loaded. This can be downloaded from the following location http://www.ibm.com/systems/director/downloads/agents.html

four.5 Mail-installation instructions

1. Install the latest drivers and firmware (come across department four.1).
2. Microsoft updates should be run after all roles and features are enabled to update the organisation with all the current hot fixes.
3. If your organisation has greater than 128GB of memory and y'all plan to enable Hyper-V after installing Windows 2008 R2 , you must offset apply the Microsoft Hotfix located at: http://support.microsoft.com/kb/979903/en-us (included in Service Pack 1 )
4. If your arrangement is running Hyper-Five it is recommended to install the following hotfix: http://support.microsoft.com/kb/2263829
5. IBM recommends you lot review all Retain Tips related to this arrangement and the Operating Organization you are installing. Retain Tips are found at http://world wide web.ibm.com/support/us/en. Review the " Problem Resolution " section for your specific automobile type/model.

5.0 Notices

INTERNATIONAL Business concern MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER Limited OR IMPLIED, INCLUDING, BUT Non Express TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions exercise not let disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the data herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the programme(s) described in this publication at any time without notice.

IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their beginning occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.Due south. registered or common law trademarks owned by IBM at the fourth dimension this data was published. Such trademarks may also exist registered or common police force trademarks in other countries. A current list of IBM trademarks is bachelor on the Web at http://www.ibm.com/legal/copytrade.shtml.

Windows is a registered trademark of Microsoft Corporation in the United states, other countries, or both.

Other visitor, production, or service names may be trademarks or service marks of others.

Windows Server 2008 R2 is the latest version of Microsoft's Windows Server operating system. Microsoft tries their best to brand each task as simple as possible, and Server 2008 R2 is a shining example of that goal in activeness. We're going to accept you through a basic install and evidence y'all but how easy it is.

A Basic Install

After booting upwardly from your install disk, you will arrive at a language and preferences screen. Once yous have chosen those options, you get to the Operating Organization Selection folio. Depending on your license and the purpose of your server, there are a multifariousness of options to choose from. For our purpose today, we are going to choose the Enterprise (Full Installation) version.

We get to read the standard Cease User License Agreement.

Since we're doing a base install and not an upgrade, so we choose the Custom (advanced) selection.

Nosotros've got a blank 24 GB disk, and so we're just going to install it there. If you want to create a division out of the available drive space or reformat a drive, and then choose Drive options (avant-garde).

Windows will take a little while with your install, and reboot a few times.

Once the install is finished, we're prompted to alter our password before logging in.

Windows requires that you accept a strong password, seven characters long with at to the lowest degree three of the 4 following: uppercase letter, lowercase letter, numeral, or symbol. You'll want to make sure you write it down somewhere for now, because if yous forget it afterward, the entire install will have to be re-done.

The Initial Configuration Tasks window pops up as soon equally you logon. You lot could also type in Oobe.exe in the Control Prompt to make it here.

Ane of the first things nosotros want to correct is the time, so choose Set time zone. Make sure that you set up the time zone beginning, because the the date and fourth dimension will shift after.

Side by side we want to choose Configure Networking. The first server installed in a network needs to exist a Domain Controller, and since they require a static IP, we are going to need to set up one up now. Double-click on Local Expanse Connection, and in one case the data box pops upwards, click on Properties.

Click on Internet Protocol Version four in the Networking box, then click Backdrop. Change the radial button to Employ the following IP address: and then enter the settings for your specific server and network IP addresses. When you're finished, click OK to relieve those settings.

That's all there is to doing a base install of Windows Server 2008 R2. We're using VMware, but if you are using whatsoever virtualization software for your install, this is the betoken where we advise taking a snapshot, as we haven't withal set any roles or functions for this server and it will save fourth dimension after to only clone up a base install like we've only done. From here you can give this server roles like Directory or Certificate Services, but those topics volition exist addressed in separate articles.

Windows Server 2008 has virtualization tools, Web resource, management enhancements, and exciting Windows vii integration help save time, reduce costs, and provide a platform for a dynamic and efficiently managed information centre.

Powerful tools such every bit Cyberspace Information Services (IIS) version 7.5, updated Server Manager and Hyper-5 platforms and Windows Power-Beat out version two.0 combine to give customers greater control, increased efficiency, and the ability to react to front end-line business needs faster than e'er before.

Here is the step by step installation of Windows 2008 R2 Server.

Before that, take a look in to the requirements of Windows 2008 R2 Server.

Component

Requirement

Foundation: ten GB or greater

Step 1. Put the DVD of Windows 2008 server in to the DVD Rom of the Machine. Make teh DVD Rom to kicking get-go. You will go the following screen well-nigh the loading files.

Step 2 : In the next screen you need to select the Linguistic communication, Currency & Time format and as well keyboard Type.

Step 3: Click on Install Now.

Footstep iv: In the Side by side you need to select the version that yous want to install on the Server Motorcar.

Stride 5 : Check on I Have the license terms and then click on Next.

Step half dozen : Click on the Custom (Avant-garde), if you desire to install fresh copy of the windows 2008 server.

Step vii : if you're installing the server on a regular IDE hd, click to select the kickoff deejay, usually Disk 0, and click Side by side.

Pace 8 : It volition start to begin the installation of the windows 2008 server. it will accept min of xx min depends on machine.

Step 9 : Once the outset portion of the copying file is over, server will automatically restarts

After the restart, the server again starts to copying the files from dvd to hard drive.

Step 10: One time all the files are copied, it will ask you for changing the password (information technology volition ask you even not however logged in) .

Step eleven: Change the password and login to access server.

That's it. Now you have successfully installed Microsoft Windows 2008 R2 Server.

Agile Directory is essential to any Microsoft network built on the client-server network model–it allows you to take a central sever chosen a Domain Controller (DC) that does authentication for your entire network. Instead of people logging on to the local machines they cosign against your DC. Lets accept a look at how to install Microsoft's Agile Directory.

Installation

Open up Server Managing director and click on roles, this volition bring upwardly the Roles Summary on the right manus side where you can click on the Add together Roles link.

This will bring upwardly the Add Roles Wizard where you tin click on next to meet a list of available Roles. Select Active Directory Domain Services from the list, you will exist told that yous demand to add together some features, click on the Add Required Features push button and click next to motility on.

A brief introduction to Active Directory will be displayed besides as a few links to boosted resources, you tin simply click next to skip by here and click install to start installing the binaries for Active Directory.

When the installation is finished you will exist shown a success message, just click close.

Configuration

Open Server Director, expand Roles and click on Active Directory Domain Services. On the right hand side click on the Run the Active Directory Domain Services Installation Wizard (dcpromo.exe) link.

This volition kicking off another wizard, this fourth dimension to configure the settings for y'all domain, click next to proceed.

The message that is shown now relates to older clients that practise not support the new cryptographic algorithms supported by Server 2008 R2, these are used by default in Server 2008 R2, click adjacent to move on.

Choose to create a new domain in a new forest.

Now you tin can name your domain, we will be using a .local domain the reason why will be explained in an upcoming article.

Since this is the get-go DC in our domain we tin change our forest functional level to Server 2008 R2.

We want to include DNS in our installation as this will allow the states to accept an Advertising Integrated DNS Zone, when you click side by side you will exist prompted with a message simply click yes to continue.

Y'all volition need to choose a place to store log files, it is a best practise to store the database and SYSVOL folder on i bulldoze and the log files on a separate drive, just since this is in a lab environment I will merely leave them all on the same drive.

Choose a Potent Active Directory Restore Manner Password and click adjacent twice to kick off the configuration.

You will be able to see what components are beingness installed by looking in the post-obit box.

When its done you will exist notified and required to reboot your PC.

That's all in that location is to it guys, at present you accept a working installation of Active Directory.

Guides, tutorials, reviews and news for System Administrators.

Install PowerShell 5 in Windows Server 2008 R2

Windows Management Framework (WMF) v.ane contains PowerShell 5.ane. By default Windows Server 2008 R2 SP1 runs the older PowerShell version 2. By downloading and installing WMF five.ane to a Windows Server 2008 R2 system, we tin can upgrade it to PowerShell version 5.1.

This postal service is part of our Microsoft 70-744 Securing Windows Server 2016 test study guide serial. For more than related posts and information check out our full 70-744 study guide.

Download WMF 5.i to a Windows Server 2008 R2 system

This also works with Windows Server 2012 and 2012 R2. Past default Windows Server 2016 already has PowerShell v.0 installed, so this is not required there. Note that to upgrade Windows Server 2008 R2 you must be using Service Pack i (SP1).

First we'll confirm the verison of PowerShell on our 2008 R2 system. This can be done by opening PowerShell, and running $PSVersionTable, every bit shown beneath.

As expected we have PowerShell version 2.0, which is the default in this operating system.

WMF 5.0 or higher is needed to provide the just-enough assistants (JEA) PowerShell feature implemented in Windows Server 2016 into the older 2008 R2 SP1 operating system.

Before we download and install WMF though, we must first install .Cyberspace Framework iv.5.2 or after, as this is a prerequisite for WMF 5.1 in Windows Server 2008 R2 SP1, and by default 2008 R2 SP1 comes with .NET 3.v. Yous tin download a newer version of .NET from here: https://www.microsoft.com/net/download/framework

Subsequently installation has completed y'all'll demand to perform a system reboot to go along.

A organization reboot is not required after installing WMF.

One time installed open PowerShell and run $PSVersionTable again, we tin can now see that PSVersion is listed as 5.1 every bit expected.

We volition now be able to configure our Windows Server 2008 R2 SP1 system to utilise just-plenty administration (JEA), as we'll cover in future posts.

Summary

By first updating the .Internet Framework so installing either WMF v.0 or 5.1, we can upgrade our PowerShell version to support Just-Enough Administration (JEA) in older versions of Windows, such as Windows Server 2008 R2, 2012, and 2012 R2.

This mail is part of our Microsoft seventy-744 Securing Windows Server 2016 exam study guide series. For more related posts and data bank check out our total 70-744 report guide.

By InterServer Staff on October 23rd, 2015

If yous want to install SMTP on Windows Server 2008, start by launching the Server Director console(type servermanager.mscin the search box and press Enter), then select Features and click Add features

Check SMTP sever

If yous see a prompt like the one in the picture beneath, click the Add required servicesbutton

Ensure that IIS Metabase Compatibility and IIS 6 Management Console are selected and click Next

Confirm the installation by clicking the Install button

Once the installation is complete, click Close

When you configure the SMTP server, y'all would want to disable Open up Relay asthis will ensure that your server will not be used for sending spam messages. In addition to taking the steps below, you can likewise configure the Firewall and so that only 127.0.0.1 talks to port 25 on the server and all other connections are rejected.

How to configure the SMTP server on Windows Server 2008 R2

Showtime the IIS 6 Managing director console (type inetmgr6 in the search box and press Enter). Right click on SMTP virtual server and select Backdrop

Open up the Access tab and click Relay

Make certain that under Relay restrictions Only the list below is selected

Click the Add button and on the next screen, enter the local host IP address, 127.0.0.ane and click OK

Click the OK button over again

Click Connection and repeat the same steps by calculation the 127.0.0.1 IP accost

Click the Authentication button and select Anonymous access.

Y'all tin leave the default settings nether the Messages and Delivery tabs. Under Outbound Security of the Commitment tab, you can leave Anonymous admissionselected since nosotros take chosen only localhost to connect and relay mail.

Testing the server

Make certain that Telnet is installed, if it isn't, showtime the Server Manager console (blazon servermanager.mscin the search box and printing Enter), click Features, Add features, select Telnet client and install the feature.

In one case Telnet is installed, start command prompt (type cmd in the search box and press Enter), then blazon telnet localhost 25 and press Enter again

If you lot can connect to the mail sever, you should receive a message back; the message will vary from one server to another, just typically the response would include Microsoft ESMTP server set along with the Version number.

[German]Microsoft released update KB4565524 for Windows Server 2008 R2 on July fourteen, 2020. Amongst other things, the update is intended to shut the critical SIGRed vulnerability in the Windows DNS server. All the same, users report that the update installation fails with error code 0x80070661.

The SIGRed vulnerability

At that place has been a bug in the code of the Windows DNS server for 17 years that leads to a disquisitional vulnerability. The worm exploitable vulnerability could be exploited to gain domain administrator privileges and compromise the entire underlying corporate infrastructure.

Affected are Windows Server 2003 up to the current Windows Server 2019. I had reported extensively about the SIGRed vulnerability in the article Critical update for SigRed Bug in Windows DNS Server. CISA warns US admins to patch the vulnerability apace (meet CISA warns admins: Patch the SIGRed Windows DNS Server vulnerability).Microsoft has released updates to close the vulnerability.

Update KB4565524 for Windows Server 2008 R2

Update KB4565524 is also bachelor for Windows Server 2008 R2 It is non explicitly mentioned there, but likewise several fixes this update fixes the SIGRed vulnerability. neben diversen Fixes schließt dieses Update die SIGRed-Schwachstelle.

Update KB4565524 not installable

In this comment, Brian Hampsonpoints out that the KB4565524 update cannot exist installed on Windows Server 2008.

the July patch for 2008R2 won't apply. It reverts subsequently install. 0x80070661 – wrong compages.

Hampson points to this thread at reddit.com, where the trouble is likewise explained. One affected person writes:

Anyone having event installing the patch for the new CVE? windows 2008R2

Then i installed the SSU for 2008R2 KB4562030

Rebooted even though it wasn't required

So installed the KB4565524

Rebooted as asked and at present information technology goes to Failure Windows update reverting update.

This happened on iii different Windows 2008R2 machines

and strangely nothing in the WU logs or event viewer

Anyone got that effect?

So he does not get the update installed on Windows Server 2008 R2. The update might go the error lawmaking 0x80070661 – wrong architecture. .

The cause: Missing ESU license

In this comment I have named the reason for the crude mistake message. Systems with Windows Server 2008 R2 that practise not accept an ESU license are excluded from the update installation. Without an ESU license all update installations will fail and a rollback volition be initiated. The problem as far as I have found out: It was nearly impossible for customers without book license subscriptions or E3 plans to get an ESU license – I don't know a solution yet.

The (unofficial) BypassESU solution used past some Windows vii users is not an selection for Windows Server 2008 R2 systems (imho, due to many collateral amercement). My tip would be to take a look at the post-obit weblog post (Windows Server 2008 R2: 0patch fixes SIGRed vulnerability). Information technology describes a solution from Acros Security that protects systems from vulnerabilities for little coin fifty-fifty without an ESU license.

By InterServer Staff on October 23rd, 2015

If you lot desire to install SMTP on Windows Server 2008, start past launching the Server Manager panel(type servermanager.mscin the search box and press Enter), and then select Features and click Add together features

Check SMTP sever

If you see a prompt similar the one in the picture below, click the Add required servicesbutton

Ensure that IIS Metabase Compatibility and IIS 6 Management Console are selected and click Next

Confirm the installation past clicking the Install push

One time the installation is complete, click Close

When you lot configure the SMTP server, you would desire to disable Open Relay asthis volition ensure that your server will not be used for sending spam messages. In add-on to taking the steps below, you lot can also configure the Firewall and so that only 127.0.0.1 talks to port 25 on the server and all other connections are rejected.

How to configure the SMTP server on Windows Server 2008 R2

Starting time the IIS half dozen Managing director panel (type inetmgr6 in the search box and press Enter). Right click on SMTP virtual server and select Properties

Open the Access tab and click Relay

Brand certain that under Relay restrictions Simply the listing below is selected

Click the Add button and on the next screen, enter the local host IP address, 127.0.0.1 and click OK

Click the OK push button once more

Click Connection and echo the same steps by calculation the 127.0.0.ane IP address

Click the Authentication button and select Anonymous access.

You can leave the default settings under the Letters and Delivery tabs. Under Outbound Security of the Delivery tab, you can go out Bearding accessselected since we have called but localhost to connect and relay post.

Testing the server

Brand sure that Telnet is installed, if information technology isn't, start the Server Manager panel (type servermanager.mscin the search box and press Enter), click Features, Add together features, select Telnet client and install the feature.

Once Telnet is installed, beginning command prompt (type cmd in the search box and printing Enter), so type telnet localhost 25 and press Enter once again

If you can connect to the mail sever, y'all should receive a bulletin back; the message will vary from 1 server to some other, but typically the response would include Microsoft ESMTP server set forth with the Version number.

Question

I accept but buy new Server. I purchase new license windows server 2016. I deploy install windows server 2016

My system is stable in MS SQL server 2008R2. I want to install SQL server 2008R2 on Windows Server 2016.

Answers

I has installed sucessfull SQL 2008R2 On windows server 2016.

Important of SQL 2008R2 requirement iii.5.1 SP1. however I only test lab. I think the link belows SQL version of Windows compatibility recommend.

• Edited by Phuong, Nguyen Van Wednesday, March 1, 2017 three:03 PM

22 years of database experience, well-nigh with SQL Server. Please 'Mark as answered' those posts that helped y'all.

• Proposed as answer past philfactor Editor Saturday, February 25, 2017 10:33 PM
• Marked as answer past Phuong, Nguyen Van Sunday, February 26, 2017 4:24 AM

22 years of database feel, most with SQL Server. Please 'Marker as answered' those posts that helped you.

• Marked as respond by Phuong, Nguyen Van Wed, March i, 2017 2:50 PM

All replies

22 years of database feel, about with SQL Server. Delight 'Marking as answered' those posts that helped you.

• Proposed as respond by philfactor Editor Sat, Feb 25, 2017 10:33 PM
• Marked as answer by Phuong, Nguyen Van Lord's day, February 26, 2017 4:24 AM

So I but install SQL server 2008R2 on Windows server 2012R2

22 years of database experience, most with SQL Server. Please 'Mark as answered' those posts that helped you.

• Marked as answer by Phuong, Nguyen Van Wednesday, March 1, 2017 2:50 PM

I has installed sucessfull SQL 2008R2 On windows server 2016.

Important of SQL 2008R2 requirement 3.5.1 SP1. however I only test lab. I think the link belows SQL version of Windows compatibility recommend.

• Edited by Phuong, Nguyen Van Wednesday, March ane, 2017 3:03 PM

I have but buy new Server. I buy new license windows server 2016. I deploy install windows server 2016

My system is stable in MS SQL server 2008R2. I want to install SQL server 2008R2 on Windows Server 2016.

I know this is an quondam thread. I was searching whether SQL 2008 R2 compatible with Server 2016. Based on the response above, information technology is uniform with 2016. So I decided to install information technology on Server 2019.

I am able to become my application to run on SQL 2008 R2 in Server 2019.

SQL 2008 R2 background dissipation is .net iii.5. Simply solve the problem of installing .internet.3.5 on OS Server 2016 or 2019, it will exist fine. Installing .cyberspace.3.five is unproblematic. So 2008 still runs on 2016 and 2019 :). MS tells me not to support higher features like Clustering SQL or HA . MS is not committed 🙂

How Do I Set My 2008r2 Server To Allow Users To Set Background,

Source: https://broke.jonsimsauctioneering.com/life-hack/how-to-install-windows-server-2008-r2/

Posted by: williamsstenly.blogspot.com

Share this post